Ezlo PlugHub Energy LED Behavior

Reset button action	Result action	LED Indication	Z-Wave action

Connect the Ezlo PlugHub to the power supply with the button pressed down	Test mode	3 blinks per second
One short (0.2 – 2,5 seconds) pressing	Change the plug state (On→ Off / Off→ On) Send the broadcast message to NMA server	1 blink	Broadcast HAIL message
One long (5 – 9.5 seconds) pressing	Reset to default options of a local WiFi connection of an PlugHub32 hub	3 blinks per second, stop when reset process will be finished Once finished – 1 blink per second, until PlugHub will be connected to Wi-Fi
One long (more than 10 seconds) pressing	Soft reset (remove all devices, reset settings, hub remains connected to Wi-Fi LAN)	10 blinks per second, stop when reset process will be finished Start blinking after 5th second of button pressed
One long (more than 20 seconds) pressing	Factory reset	LED is On, turn Off when reset process will be finished Turn On LED after 10th second of button pressed