| NA |
Atom is not connected to the router |
1 blink per second, until Atom will be connected to Wi-Fi |
|
| NA |
Atom is connected to the router but doesn’t connected to the server |
1 blink per 3 seconds, until Atom will be connected to the server |
|
| NA |
Atom is connected to the server |
NO blinks |
|
| NA |
Atom is in inclusion mode, interview is NOT started |
LED is On |
|
| NA |
Atom is in inclusion mode, interview is started |
10 blinks per second, stop when interview process will be finished |
|
| NA |
Atom is in exclusion mode, interview is NOT started |
LED is On |
|
| NA |
Atom is in exclusion mode, interview is started |
10 blinks per second, stop when interview process will be finished |
|
| Connect the Ezlo Atom to the power supply with the button pressed down |
Test mode |
3 blinks per second |
|
| One short (0.2 – 2,5 seconds) pressing |
Send the broadcast message to NMA server |
1 blink |
Broadcast HAIL message |
| Two short (0.2 – 2,5 seconds) pressings |
Reset to default options of a local WiFi connection of an Atom32 hub |
- 3 blinks per second, stop when reset process will be finished
- Once finished – 1 blink per second, until Atom will be connected to Wi-Fi
|
|
| One long (5 – 9.5 seconds) pressing |
Soft reset (remove all devices, reset settings, hub remains connected to Wi-Fi LAN) |
- 10 blinks per second, stop when reset process will be finished
- Start blinking after 5th second of button pressed
|
|
| One long (more than 10 seconds) pressing |
Factory reset |
- LED is On, turn Off when reset process will be finished
- Turn On LED after 10th second of button pressed
|
|
